参考 disko 和 NixOS Manual
从 ISO 文件安装
- 从镜像源下载 ISO 文件
- 烧录进U盘并插入电脑选择U盘启动/虚拟机挂载ISO并启动(都需要关闭安全启动)
可选镜像源: https://mirrorz.org/os/NixOS
从局域网连接 liveCD 环境
使用 ip a 查看 IP, 使用 passwd 设置密码, 然后就可以在局域网内通过 ssh nixos@192.168.137.124 进行远程连接开始安装
切换到 root 用户
使用 disko 进行快速分区
disko.nix
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
| {
disko.devices = {
disk.main = {
type = "disk";
device = "/dev/sda";
content = {
type = "gpt";
partitions = {
ESP = {
priority = 1;
size = "512M";
type = "EF00";
content = {
type = "filesystem";
format = "vfat";
mountpoint = "/boot";
mountOptions = [ "umask=0077" ];
};
};
luks = {
size = "100%";
content = {
type = "luks";
name = "cryptroot";
content = {
type = "btrfs";
extraArgs = [ "-f" ];
subvolumes = {
"@root" = {
mountpoint = "/";
mountOptions = [ "compress=zstd:3" "noatime" "space_cache=v2" ];
};
"@home" = {
mountpoint = "/home";
mountOptions = [ "compress=zstd:3" "noatime" "space_cache=v2" ];
};
"@nix" = {
mountpoint = "/nix";
mountOptions = [ "compress-force=zstd:3" "noatime" ];
};
"@snapshots" = {
mountpoint = "/.snapshots";
mountOptions = [ "compress=zstd:3" "noatime" ];
};
};
};
};
};
};
};
};
};
}
|
disko-without-luks.nix
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
| {
disko.devices = {
disk.main = {
type = "disk";
device = "/dev/sda";
content = {
type = "gpt";
partitions = {
ESP = {
priority = 1;
size = "512M";
type = "EF00";
content = {
type = "filesystem";
format = "vfat";
mountpoint = "/boot";
mountOptions = [ "umask=0077" ];
};
};
root = {
size = "100%";
content = {
type = "btrfs";
extraArgs = [ "-f" ];
subvolumes = {
"@root" = {
mountpoint = "/";
mountOptions = [ "compress=zstd:3" "noatime" "space_cache=v2" ];
};
"@home" = {
mountpoint = "/home";
mountOptions = [ "compress=zstd:3" "noatime" "space_cache=v2" ];
};
"@nix" = {
mountpoint = "/nix";
mountOptions = [ "compress-force=zstd:3" "noatime" ];
};
"@snapshots" = {
mountpoint = "/.snapshots";
mountOptions = [ "compress=zstd:3" "noatime" ];
};
};
};
};
};
};
};
};
}
|
执行分区
1
2
3
| sudo NIX_CONFIG="access-tokens = github.com=github_pat_xxx" \
HTTP_PROXY="http://192.168.137.1:1080" HTTPS_PROXY="http://192.168.137.1:1080" \
nix --extra-experimental-features "nix-command flakes" run github:nix-community/disko/latest -- --mode disko ./disko.nix
|
生成初始化配置
1
| nixos-generate-config --no-filesystems --root /mnt
|
简单配置系统
只需要编辑 /mnt/etc/nixos/configuration.nix, 其默认配置如下
1
2
3
4
5
6
7
8
| { config, lib, pkgs, ... }: {
imports = [ ./hardware-configuration.nix ];
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.kernelPackages = pkgs.linuxPackages_latest;
networking.networkmanager.enable = true;
system.stateVersion = "26.05";
}
|
配置流程如下
- 将
disko.nix 文件移动到 /mnt/etc/nixos/ 下 - 在
/mnt/etc/nixos/configuration.nix 中引入 disko NixOS module 和 disko.nix (后续使用 Flake 管理后将恢复为只引入硬件配置) - 在
/mnt/etc/nixos/configuration.nix 中追加其他必要配置
移动 disko.nix
1
| cp disko.nix /mnt/etc/nixos/
|
开始编辑 /mnt/etc/nixos/configuration.nix
1
| vim /mnt/etc/nixos/configuration.nix
|
引入 disko 配置, 后续使用 Flake 管理后将恢复为只引入 hardware-configuration.nix
1
2
3
4
5
6
| imports =
[
./hardware-configuration.nix
"${builtins.fetchTarball "https://github.com/nix-community/disko/archive/master.tar.gz"}/module.nix"
./disko.nix
];
|
追加其他必要配置到 configuration.nix
- 网络代理
- 时区与语言
- 新建用户及其密码, 密钥, 默认shell等等
- 必要软件如vim, git, curl等
- 设置 GitHub PAT(公共仓库只读即可), 避免被 GitHub 限制以及后续命令的简洁
- 启用 Flake 特性(后续用 Flake 进行管理)
所有配置参考官方手册
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
| networking.hostName = "nixos";
networking.proxy.default = "http://192.168.137.1:1080";
time.timeZone = "Asia/Shanghai";
i18n.defaultLocale = "en_US.UTF-8";
i18n.extraLocaleSettings = {
LC_ADDRESS = "zh_CN.UTF-8";
LC_IDENTIFICATION = "zh_CN.UTF-8";
LC_MEASUREMENT = "zh_CN.UTF-8";
LC_MONETARY = "zh_CN.UTF-8";
LC_NAME = "zh_CN.UTF-8";
LC_NUMERIC = "zh_CN.UTF-8";
LC_PAPER = "zh_CN.UTF-8";
LC_TELEPHONE = "zh_CN.UTF-8";
LC_TIME = "zh_CN.UTF-8";
};
users.users."simple" = {
isNormalUser = true;
description = "Simple";
initialPassword = "1";
extraGroups = [ "wheel" "networkmanager" ];
openssh.authorizedKeys.keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEfY4AqFEB76gUXJKVifON936yf/MdsOKTsmioQ3HDKi" ];
};
services.openssh = {
enable = true;
settings = {
PermitRootLogin = "no";
AllowUsers = [ "simple" ];
};
};
environment.systemPackages = with pkgs; [ vim git curl ];
environment.variables.EDITOR = "vim";
nix.settings.experimental-features = [ "nix-command" "flakes" ];
# 注意修改为自己的 GitHub PAT
nix.settings.access-tokens = [ "github.com=github_pat_xxx" ];
|
安装系统
仅在执行安装命令时需要手动指定 GitHub PAT 和 代理, 后续命令不再需要指定这两个参数, 因为在上一步简单配置中已经指定了 nix.settings.access-tokens 和 networking.proxy.default
1
2
3
| sudo NIX_CONFIG="access-tokens = github.com=github_pat_xxx" \
HTTP_PROXY="http://192.168.137.1:1080" HTTPS_PROXY="http://192.168.137.1:1080" \
nixos-install
|
for flake
1
2
3
| sudo NIX_CONFIG="access-tokens = github.com=github_pat_xxx" \
HTTP_PROXY="http://192.168.137.1:1080" HTTPS_PROXY="http://192.168.137.1:1080" \
nixos-install --flake '/mnt/etc/nixos#nixos'
|
如果使用了 luks 则安装过程会要求设置 磁盘加密密码
重启并进入系统
关机
电脑拔掉U盘/虚拟机卸载ISO
开机并设置从 systemd-bootx64.efi 启动 (如果使用了 luks 则会要求输入 磁盘加密密码 )进入命令行, 接着输入用户名和密码进行登录并设置 zsh
简单安装就到这里, 后续会继续优化, 包括: 切换到 Flake, 使用 home-manager, 安装 hyprland / niri, noctalia 等等, 以此构建可正常使用的 NixOS
静态IP配置(可选)
- 编辑静态 IP 的配置
- 如果是安装完成进入系统后编辑则需要生成新世代
- 在安装时编辑后第一次进入系统/生成新世代后进入系统
- 停止已有连接,启动配置连接,删除已停止连接
编辑 configuration.nix, 可以是在安装时编辑(/mnt/etc/nixos/configuration.nix), 也可以在安装完成进入系统后编辑(/etc/nixos/configuration.nix)
1
| sudo vim /etc/nixos/configuration.nix
|
追加如下内容
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
| networking.networkmanager.ensureProfiles.profiles = {
"eth0" = {
connection = {
id = "eth0";
uuid = "9f6f3a52-1b88-4b0d-a2d0-8b7e3b4c9a01";
type = "ethernet";
interface-name = "eth0";
autoconnect = true;
};
ipv4 = {
method = "manual";
address1 = "192.168.137.10/24,192.168.137.1";
dns = "223.5.5.5;223.6.6.6;";
};
ipv6.method = "disabled";
ethernet = {};
};
};
|
如果是安装时编辑则继续安装并重启进入系统, 否则还需要执行如下命令生成新世代并重启进入系统
1
| sudo nixos-rebuild switch
|
之前已经配置了 users.users."simple".extraGroups = [ "wheel" "networkmanager" ];, 所以下面的 nmcli 命令均不需要 sudo
查看现有连接
1
| nmcli -f NAME,UUID,FILENAME connection show
|
停止已有连接
1
| nmcli connection down "Wired connection 1"
|
启动配置连接
1
| nmcli connection up eth0
|
删除已停止连接
1
| nmcli connection delete "Wired connection 1"
|
后续日常使用目标
- 开机并输入加密密码进入
tty 环境 - 用账户密码登录
- 执行
start-hyprland 启动 hyprland 和 noctalia
附: 安装好后系统的配置
查看配置文件
可以看到三个文件
disko.nix: 与之前安装步骤中的内容相同configuration.nix: 内容即是之前安装步骤修改完成后的hardware-configuration.nix: 根据载入 ISO 时选项不同与安装环境(实体机/虚拟机)有略微不同
configuration.nix
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
| { config, lib, pkgs, ... }: {
imports =
[
./hardware-configuration.nix
"${builtins.fetchTarball "https://github.com/nix-community/disko/archive/master.tar.gz"}/module.nix"
./disko.nix
];
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.kernelPackages = pkgs.linuxPackages_latest;
networking.networkmanager.enable = true;
system.stateVersion = "26.05";
networking.hostName = "nixos";
networking.proxy.default = "http://192.168.137.1:1080";
networking.networkmanager.ensureProfiles.profiles = {
"eth0" = {
connection = {
id = "eth0";
uuid = "9f6f3a52-1b88-4b0d-a2d0-8b7e3b4c9a01";
type = "ethernet";
interface-name = "eth0";
autoconnect = true;
};
ipv4 = {
method = "manual";
address1 = "192.168.137.10/24,192.168.137.1";
dns = "223.5.5.5;223.6.6.6;";
};
ipv6.method = "disabled";
ethernet = {};
};
};
time.timeZone = "Asia/Shanghai";
i18n.defaultLocale = "en_US.UTF-8";
i18n.extraLocaleSettings = {
LC_ADDRESS = "zh_CN.UTF-8";
LC_IDENTIFICATION = "zh_CN.UTF-8";
LC_MEASUREMENT = "zh_CN.UTF-8";
LC_MONETARY = "zh_CN.UTF-8";
LC_NAME = "zh_CN.UTF-8";
LC_NUMERIC = "zh_CN.UTF-8";
LC_PAPER = "zh_CN.UTF-8";
LC_TELEPHONE = "zh_CN.UTF-8";
LC_TIME = "zh_CN.UTF-8";
};
users.users."simple" = {
isNormalUser = true;
shell = pkgs.zsh;
description = "Simple";
initialPassword = "1";
extraGroups = [ "wheel" "networkmanager" ];
openssh.authorizedKeys.keys = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEfY4AqFEB76gUXJKVifON936yf/MdsOKTsmioQ3HDKi" ];
};
services.openssh = {
enable = true;
settings = {
PermitRootLogin = "no";
AllowUsers = [ "simple" ];
};
};
environment.systemPackages = with pkgs; [ vim git curl ];
environment.variables.EDITOR = "vim";
programs.zsh.enable = true;
nix.settings.experimental-features = [ "nix-command" "flakes" ];
}
|
hardware-configuration.nix
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
| # Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports = [ ];
boot.initrd.availableKernelModules = [ "sd_mod" "sr_mod" ];
boot.initrd.kernelModules = [ ];
boot.kernelModules = [ ];
boot.extraModulePackages = [ ];
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
virtualisation.hypervGuest.enable = true;
}
|